Chemical Division

Product Details:

We are supplier of O. S. D. 101 - oil spill dispersant. there are several ways to tackle oil spill at sea. The best method is to collect the oil and physically recover it from the water. However, mechanical recovery of oil is not feasible in rough weather conditions. Secondly, cost of oil cleanup by mechanical means is high as compared to chemical clean up methods.

Product Details:

Acid Corrosion Inhibitors are generally used in for cleaning in pipe line to stimulate the liquid flow from the pipe and to remove incrustations. Acids , preferentially, hydrochloricn acid is are forced under high pressure through the hole into the rock formation to produce fracture around the hole. About 10 -15 % of hydrochloric acid is generally used for producing fracture. When the deposit is calcareous. When such a large quantity of hydrochloric acid is used, it is needless to say that well equipment should be protected from corrosion by use of inhibitor.

Acid corrosion inhibitor formulated by 3A Exports is high quality corrosion inhibitor which is stable upto 120 ºC. It is also used in various other industries where corrsion occures in pipe line such as Sugar, Oil Field and other related industries.

Specifications:

• While the acid cleaning process in the pipe line in sugar industry, usage of the Hydrochloric acid is much frequent.
• Acid corrosion inhibitor is high-temperature, acid corrosion inhibitor used to protect low alloys and corrosion-resistant
• alloys.

Additional Information:

• Item Code: S110
• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer),Other
• Port of Dispatch: Nhava Sheva
• Packaging Details: 40 kg to 200 Kg

Product Details:

Scale Inhibitor

our clients can avail form us scale inhibitor. Salt content of sea water on an average of 3. 5%. In addition to this, sea water contains about 13 ppm strontium, 65 ppm bromine and trace amount of many. Strontium forms a sparingly soluble compound with sulfate solubility of stantium sulfate in water is 114 mg/lit at the temperature of 25ºc. That is less than calcium sulfate, which is 2630 mg/ht. Expressed as 2h2o, caso4 and more than barium sulfate that has solubility of 2. 3 mg/lit.

specifications of scale inhibitor:

Additional Information:

• Item Code: oil-3
• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer),Other
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: EXports standard Packing

Product Details:

Boiler Water Treatment Chemical

3DTRAN MS 2 is a product based on the blend of various poly -  Phosphates. The poluphosphates show a synergic effect to reduction of hardness by dequestration as well as keeping the scale forming irons in solution. It is specially meant for potable water addition as it shows no carry over with stand. The poly phosphates are not the toxic materials for human beings as well as animals and aquarians

Product Details:

3D Acid - S110 - Acid Inhibitor for Acid Cleaning

Specifications

While the acid cleaning process in the pipe line in sugar indutry, usage of the Hydrochloric acid is much frequent.
Acid corrosion inhibitor is high-temperature, acid corrosion inhibitor used to protect low alloys and corrosion-resistant
alloys.

 

 

It is also used in various other industries where corrsion occures in pipe line such as Oil Field and other related industries.

 

 

Product Details:

Viscosity reducers are highly effective chemicals that acts as a viscosity reducer ofr cane sugar syrups. It finds various application with various chemicals cheracteristics.

It is highly effective polyacrylate based viscosity reducer chemical that is formulated to reduce viscosity of surgar syrup during pan and massecuite.

It is an effective formulation of polyacrylate polymer which highly increases sugar manufacturing efficiency by better lubrication purging, better circulation of pans, increases centrifugal efficiency, less boiling time, reduced content of ash.

        Advantages:

• Improves Circulation
• Shortens Boiling Time
• Improves Sugar Recovery
• Aids Purging
• Reduces Ash Content
• Lubricates Crystals Effective

Product Details:

Sugar Processing Antiscalants

Evaporator section is the heart of sugar manufacturing process and is directly related to the efficiency of the plant. Clear juice contains high percentage of scale forming cations and anions that can form hard scales inside the calendria tubes and hinder heat transfer.

In evaporator mixed juice from extraction is preheated prior to liming so that the clarification is optimal. The milk of lime, calcium hydroxide or Ca(OH)2, is metered into the juice to hold the required ratio and the limed juice enters a gravitational settling tank: a clarifier. The juice travels through the clarifier at a very low superficial velocity so that the solids settle out and clear juice exits. 

The mud from the clarifier still contains valuable sugar so it is filtered on rotary vacuum filters where the residual juice is extracted and the mud can be washed before discharge, producing sweet water. The juice and the sweet water are returned to process. 

The clear juice has probably only 15% sugar content but saturated sugar liquor, required before crystallisation can occur, is close to 80% sugar content. Evaporation in a steam heated multiple effect evaporator is the best way of approaching the saturated condition because low pressure water-vapour can be produced for heating. The greater the number of effects, the less steam is required to drive the first effect. Each subsequent effect is heated by the vapour from the previous effect so has to be operated at a lower temperature and therefore lower pressure. 

Dew antiscalant retards this scale formation and improves heat transfer. The product functions as a threshold inhibitor and crystal distorter which effectively increases the solubility of the dissolved salts. Any crystals that form are modified and dispersed so that adherent scale formation on the heat transfer surfaces is prevented. The use of antiscalant helps to reduce evaporator cleaning frequency and substantially reduces the amount of chemical required for such cleaning. Dew antiscalant retards this scale formation and improves heat transfer. The product functions as a threshold inhibitor and crystal distorter which effectively increases the solubility of the dissolved salts. Any crystals that form are modified and dispersed so that adherent scale formation on the heat transfer surfaces is prevented. The use of antiscalant helps to reduce evaporator cleaning frequency and substantially reduces the amount of chemical required for such cleaning. 

Sugar processing antiscalants also contains surfactants having high dispersing power towards inorganic salts. In the evaporators, they inhibit scale formation by modifying the crystals, improving heat transfer and crushing capacity between cleanings. 

Benefits

• Improved heat transfer through clean evaporating surfaces
• Reduced steam/fuel consumption
• Minimum number of cleaning per season
• Prevention of over-loading of vacuum pans
• Enhanced equipment life

Dew manufactures complete range of sugar processing chemicals. For more details and literature visit our download section.

Product Details:

GREASE – OFF is a liquid compound which is a blend of aromatic solvents, wetting agents, dispersing agents. It is very sffective in removing havy duty grease, oil and dirt etc., from oil tanks and decks. It can also be used for cleaning tanks which have been used  for any type of transportation of any type of animal or vegetable fat

Product Details:

Electro Cleaner

Elkleen 705 is a solvent based degreasing chemical which is   used for cleaning of motors, starters,  switchgear, generation   armatures, brushes, bearings, instruments etc. It can be used   where rapid and  effective degreasing is required. It is safe to use  on all metals, glasses, painted surface etc. It has excellent  moisture repelling property and does not conduct electricity.

Product Details:

GREASE – OFF is a liquid compound which is a blend of aromatic solvents, wetting agents, dispersing agents. It is very sffective in removing havy duty grease, oil and dirt etc., from oil tanks and decks. It can also be used for cleaning tanks which have been used for any type of transportation of any type of animal or vegetable fa

Product Details:

CORONIL 35 is an Oil soluble water dispersible semipolar organic inhibitor,which is very effective for sweet (CO2) or Sour (H2S) gas condensate wells and sweet and sour oil wells.

 

Product Details:

corrosion inhibitor used to protect low alloys and corrosion-resistant
alloys.

 

 

It is also used in various other industries where corrsion occures in pipe line such as sugar industry etc.

 

Additional Information:

• Item Code: chem01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Other
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: exports standard packing

Product Details:

Oil Line Corrosion Inhibitor

We have gained expertise in providing our clients with a comprehensive range of Oil Line Corrosion Inhibitors, which is formulated using organic specified amines with dispersants. As in almost all oil processing companies corrosion in pipelines, drillings and flowlines is found regularly. For this, we have developed an advanced range of non-corrosive coronil-ol that gives a tough film in the pipeline. In pipelines, if the velocity of flow is less then required for turbulent flow, liquids will not contact top area. For this, in most cases free liquid moves along the bottom of pipe, which depends upon velocity the layer that may be both condensate and water or as discrete layers of oil and water.

Specification:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: EXPORTS STANDARD Packing

Product Details:

Water Injection Corrosion Inhibitor

large Quantities of water is been used in the Oil fields for flooding. This water normally contain about 3 - 3.2%. Sodium Chloride because of which water becomes highly corrosive. To prevent this corrosion this can be used.

Product Details:

3AM-CI-203 (Corrosion Inhibitor)

 

Introduction:
3AM-CI-203 is a water soluble corrosion inhibitor -used in oil refineries and in other chemical
industry processes in oil refinery. The product inhibits corrosion caused by CO2, H2S, SO2, HCl

and other corrosive gases and their by-products during production and refining processes more 
particularly in refinery overhead systems as well as transportation and storage of oils (water-in-oil
emulsion / salt water-in-oil emulsion) in refinery and oil field industry.

Contents:
The product contains suitable blend of organic filming amines and their reaction adducts in
appropriate solvent.

State                         : Liquid
PH as it is               :  8.0-9.5
Density @ 25 °C   :  1.01-1.10 @ 25°c
Color                       : Yellow to dark brown
Odor                        : Not particular
Solubility in Water : Completely soluble

*Properties mentioned and color shown in the photo above is for general idea of the product. Actual product property may vary.

 

Advantage: 
The inhibitor 3AM-CI-203 is meant for chemical process system e.g. refinery overhead systems, which
do not cause emulsions which lead to oil carry-under. Aqueous condensates in refinery overhead
systems are extremely corrosive due to the presence of HCI from the hydrolysis of chloride salts
indigenous to crude oil composition and other corrosion agents. Thus, the product provides

 

· Excellent multi-metal protection against corrosion 
· Works effectively on wide pH range and temperature up to 150 C 

· product contains no halogens, phosphorous and heavy metals 
· Compatible with other refinery chemicals 
· Inhibits multi-metal systems

 

Usage method:

3AM-CI-203 can be injected into, or otherwise added to, the refinery system in
batch or continuous manner. The effective dose is 20 to 200 ppm and precisely it may be 100120ppm.
It can be added neat or diluted with water or formulated or blended with other additives
useful in refineries.

 

Safety and handling: Before handling the product, refer material safety data sheet which contains
detailed information about this product (available on request).

Packing: 3AM-CI-203 is available in 45Kg Carboy and 190Kg hdpe drums or iso-tankers.

 

Product Details:

In the process of drilling, the drill string becomes differentially stuck, then there are only three options remaining to free it.
 
1. Mechanical Method.
2. Spotting fluids.
3. Hydrostatic pressure can be reduced.

In general, penetration of oil based spotting fluids into the filter cake accompanied by dehydration and cracking results in reduction of a differential pressure across the drill string. Spotting fluids are generally positioned in the open hole to completely cover the problem area.

Product Details:

RUSTKLEEN 58 is a heavy duty rust remover which should be used whenever rust or stains have formed, both to remove them and give  surface a temporary rust resisting top layer. It can be used on  decks, engine room, cargo holds etc. Also, it is used for removing  rust stains from wood, glass ceramics etc. It conforms to the defence specification DEF 37 as Rust Remover.

Chemical Composition : Phosphoric acid based rust stripper with wetting and penetrating  agent suitably fortified with corrosion inhibitor or prevent attack  on bear meta

Product Details:

Rust Preventive Oil
Protecta 30H is a hard film type solvent deposited resionous to use rust preventive for exterior suface of machinery, pipes, casting where in case of removal of its film is not a major consideration. Since its film is transparent and tough, they sre not recommended for the moving parts of machinery. Its protection period is much more than soft film type rust preventions. It is applied by dipping or brushing. It can be over painted 

Product Details:

Mill sanitation is an important step in the sugar manufacturing process. Certain bacteria like leuconostoc can lead to sucrose loss in the juice by inversion besides slime formation and bad odour.

Use of mill sanitation chemicals is impaired due to lack of proper methodology to evaluate its cost - benefits to the factory. Purity drop method is incorrect, reducing sugar rise from primary juice to mixed juice is time consuming besides being prone to sampling errors. Since there is large variation in cane quality, juice composition; proper composite sampling with juice preservative is crucial. Such analysis, even carried accurately, do not indicate the upstream effect which are likely to be exerted by good biocide.

It is known that biocides capable of killing microbes including thermophilic bacteria in cane juice within shortest possible time will control microbial inversion and acid formation in every stage of sugar manufacturing process. The analysis of invert sugars and molasses was carried out and it was found that use of proper biocide for mill sanitation do reflect in the analysis of final molasses.When biocide capable of killing microbes in cane juice is applied for mill sanitation, there is steady but small rise in invert sugar % brix and titrable acidity % brix between every stage of sugar processing. Titrable acidity and invert sugar per 100 brix of final molasses was much lower when Dew mill sanitation chemical is used and the difference is substantial and can be used to evaluate saving of sugar loss from microbial inversion.

Dew mill sanitation biocides prevent purity drop in the cane juice due to sucrose loss by inversion and also helps in controlling slime and bad odour.

These are specifically developed organic biocides for improved sanitation/hygiene in sugarcane juice and sugar mills. These are vastly superior to conventional chemicals lime ammonium bifluoride, bleaching powder and other halogen compounds.

Benefits

• Effective control of biological growth in sugar juice
• Prevention of loss of vital sugar by avoiding inversion
• Improved sanitation of mill surroundings

ation in the software.

Other Information

• Pay Mode Terms: D/A (Documents Against Acceptance), T/T (Bank Transfer)
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: EXPORTS STANDARD PACKING

Additional Information:

• Item Code: MILL001
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX STOCK
• Packaging Details: EXPORTS STANDAR PACKING

Product Details:

we are offering specialty chemicals developed for sectors like Oil Field, Marine, Industrial, Sugar Processing, Water treatment and other related industries.

Our products are speacily formulated to suite specfic industry need and as per the requirement of customer for better peformance at lower price with high concentration.

Mill sanitation is an important step in the sugar manufacturing process. Certain bacteria like leuconostoc can lead to sucrose loss in the juice by inversion besides slime formation and bad odour.

Use of mill sanitation chemicals is impaired due to lack of proper methodology to evaluate its cost - benefits to the factory. Purity drop method is incorrect, reducing sugar rise from primary juice to mixed juice is time consuming besides being prone to sampling errors. Since there is large variation in cane quality, juice composition; proper composite sampling with juice preservative is crucial. Such analysis, even carried accurately, do not indicate the upstream effect which are likely to be exerted by good biocide. 

It is known that biocides capable of killing microbes including thermophilic bacteria in cane juice within shortest possible time will control microbial inversion and acid formation in every stage of sugar manufacturing process. The analysis of invert sugars and molasses was carried out and it was found that use of proper biocide for mill sanitation do reflect in the analysis of final molasses.When biocide capable of killing microbes in cane juice is applied for mill sanitation, there is steady but small rise in invert sugar % brix and titrable acidity % brix between every stage of sugar processing. Titrable acidity and invert sugar per 100 brix of final molasses was much lower when Dew mill sanitation chemical is used and the difference is substantial and can be used to evaluate saving of sugar loss from microbial inversion. 

Dew mill sanitation biocides prevent purity drop in the cane juice due to sucrose loss by inversion and also helps in controlling slime and bad odour. 

These are specifically developed organic biocides for improved sanitation/hygiene in sugarcane juice and sugar mills. These are vastly superior to conventional chemicals lime ammonium bifluoride, bleaching powder and other halogen compounds. 

Benefits

• Effective control of biological growth in sugar juice
• Prevention of loss of vital sugar by avoiding inversion
• Improved sanitation of mill surroundings

 

ation in the software.

Additional Information:

• Item Code: sugar01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A,Other
• Port of Dispatch: EX-MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: exports Standard Packing

3AM-AC-1
(ALGICIDE / FUNGICIDE / BACTERICIDE)
Introduction:
“To inhibit formation of microbes during the storage of water or process water treatment” is the main
purpose of using 3AM - AC-1. The troublesome microbiological growth can cause number of
problems that can be nullified by our product 3AM-AC-1, which is broad-spectrum fungicide / biocide,
effective over a broad pH range and can be used along with other additives. The product can be
used to control algal, fungal or microbial growth in swimming pool, cooling tower, closed circulation
system, chillers etc industrial process systems.
Contents of 3AM-AC-1:
It contains carbamate compounds as an active ingredient and other additives, stabilizers, which are
known for its effectiveness on the microbes.
Advantages of using 3AM-AC-1:
• Effectively controls microbe formation
• Keeps the system at its highest performance even after long storage
• Work at same dose level on fungi and bacteria
• No formaldehyde and low toxic
• Compatible with other additives
• Hazard free packing
Direction for use:
3AM-AC-1 should be added to the product in the dose range of from as low as 0.05% to 0.5% on
different microbes. But generally one can consider the dose of 0.1% to 0.3%, more precisely from
0.1% to 0.2%.
Storage:
Store the product in a cool and dry place away from direct sunlight.
Packing:
The product is available in 25 to 200 kg HDPE carboys.
Safety precautions:
Before handling the product, refer material safety data sheet which contains detailed information
about this product (available on request).

Additional Information:

• Minimum Order Quantity: 1000 Kilogram

Product Details:

Sugar Processing ChemcialsSpecifications

All types of Sugar Industry Chemicals widely used worldwide.
Specially formulated for Sugar Industry customer.

All Types of Sugar Processing Chemicals used in Sugar Industry.

 

 

 

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Delivery Time: EX-STOCK
• Packaging Details: exports standard packing

Product Details:

3am-ac-3
(algaecide / bactericide / mill sanitation chemical)
introduction:
“to inhibit / control green and other algae / bacteria / fungi is the main purpose of using 3am –ac-3. ”
these troublesome microbiological growths can cause number of problems such as plugging of
pipelines and equipments, reduced cooling capacity, corrosion etc. These problems can be nullified
by our product 3am-ac-3, which is broad-spectrum algaecide / biocide, effective over a broad ph
range and can be used along with other water treatment chemicals.
contents of 3am-ac-3:
it contains nature friendly and powerful quats, low foaming surfactants and corrosion inhibitors, which
are known for its effectiveness on the microbes.
advantages of using 3am-ac-3:
• effectively controls algae formation.
• prevents slipperiness.
• prevents development of bad fouling odor.
• inhibits chloramines formation.
• inhibits hazardous bacterial growth.
• improves cooling tower capacity, cooling capacity.
direction for use:
depending on the algal growth 3am-ac-3 should be applied continuously to the system for three
days to destroy existing algae. (if algal growth is much, it is better to remove the growth manually
before treatment for better result. After that our system engineer will recommend the optimum weekly
dose.
storage:
store the product in a cool and dry place away from direct sunlight.
packing:
the product is available in 50 to 200 kg hdpe carboys.

Product Details:

Product Details:

we are offering specialty chemicals developed for sectors like Oil Field, Marine, Industrial, Sugar Processing, Water treatment and other related industries.

Our products are speacily formulated to suite specfic industry need and as per the requirement of customer for better peformance at lower price with high concentration.

Product Details:

3am-aspan
(antiscalant for pan evaporator)
introduction:
3am-aspan is a polyacrylate, which unlike polyphosphates has an excellent hydrolytic stability.
when used at threshold levels 3am-aspan effectively inhibits the precipitation of many scaleforming
minerals and also modifies the crystal morphology. Both of these properties plays key role
in keeping heat exchanger or evaporator surfaces scale-free. 3am-aspan exhibit a threshold
inhibition property whereby a few parts per million can stabilize hundreds or thousands of times as
many scale-forming ions. Surface absorption of polymers on the growth sites of scale-forming
crystal is the most plausible explanation of the mechanism for crystal growth inhibition and
distortion.
typical properties value
appearance
clear
colourless to
pale yellow
liquid
brookfield viscosity @ 25°c 400 cps
ph 7. 0 ± 0. 2
molecular weight 2000-2300
specific gravity @ 25°c 1. 20 – 1. 30
stability in original packing > 12 months
*properties mentioned and color shown in the photo above is for general idea of the product. Actual product property may vary.
product as per customer’s required specifications are also available.
application:
3am-as should be fed into the system neat or diluted solution, with the use of a metering / dosing
pump or with the simple tap as follows:
multiple effect evaporators: 4-6 ppm added to the clarified juice tank.
juice heat exchangers: 2-3 ppm added to the main feeding tubes.
pans: a dosage of 4-5ppm based on weight of the massecuite.
or it can be fed in to the system as discussed and decided as per technical requirement.
features and benefits:
1. High performance scale inhibition in sugar evaporators.
2. Wide range of activity on calcium oxalate, calcium sulphate and calcium carbonate scales.
3. Designed to prevent the precipitation and formation of adherent calcium scales in sugar
evaporators.
storage and handling:
wear rubber gloves and safety goggles when handling. In case of skin or eye contact, wash off
with soap and water and seek medical attention. Refer material safety data sheet before handling
the product.
standard packaging: 55 kg / 220 kg drums
for more information you can contact us at